How long will glock make gen 3

This is a welcome upgrade to the Glock 19 Generation 3 for those southpaws out there. The new mag release button is not only larger, but it extends farther back to allow for much faster, easier mag changes.

When debating the Glock Gen 3 vs Gen 4 this is a valid point to consider even if you're not a lefty. See, the Glock 19 Gen 4 magazines are notched on both sides to allow for the ambidextrous mag release.

Whereas the Glock 19 Gen 3 mags are not. So, if you have a bunch of Gen 3 mags on hand, they will work in the Glock 19 4th Generation pistol if the mag release is set up right-handed. The next visible difference between Glock 19 Gen 3 and Gen 4 is its slide. Aside from the words stamped on its side, take a look at the business end of the muzzle.

The Gen 4 is the first of the Glock 19 Generations to use a larger, dual-recoil spring guide rod. That is evident when looking straight at the muzzle, there is a bigger hole that you cannot miss.

Oh, by the way, do make sure the weapon is cleared before doing this, you do not want to become a statistic. This larger, dual-recoil spring guide rod was employed to accommodate the heavier recoil of the larger rounds available now. If you spend a lot of time at the range or are involved in a competition, you can easily see the value of this upgrade. It is possible to install a Glock 19 Generation 3 recoil spring guide rod into a Glock 19 4th Generation pistol. This change is easily accomplished with a recoil spring adapter.

However, the reverse is not true. There is no way a larger recoil spring guide rod is going to fit into the smaller Glock 19 Gen 3 slide. In looking at the Glock 19 Gen 3 vs Gen 4 some parts that were changed stand alone and cannot be interchanged. The first of the Glock 19 Gen 4 upgrades that will not interchange we will look at is the slide.

When you see the larger hole obviously there beneath the barrel, this isn't much of a leap. Even if you somehow got the Gen 3 slide onto the frame of the newer Gen 4 gun, there's no way the recoil spring guide rod would ever fit through. Although, as previously mentioned, adapters are available if you want to go the other way.

The adapter will only allow you to use Gen 3 recoil spring on a Gen 4 slide. The Gen 4 slide still will not fit the Gen 3 frame. A better option to than trying to interchange the slides between the Gen 4 and Gen 3 is to upgrade the either Gen with aftermarket Glock slides for improved performance, racking grip and look.

The next item to discuss in the Glock Gen 3 vs Gen 4 ordeal is the frame. The frame designed for the Glock 19 4th Generation handgun is smaller than that of the Glock 19 Gen 3.

While longitudinally smaller, the addition of the interchangeable backstraps for the grips create a weapon that ergonomically fits a larger range of shooters hand sizes.

Also, the Gen 4 frame as a larger channel in its bottom to accommodate the new, larger recoil spring assembly. There's no wiggle room here when it comes to the frame in the Glock Gen 3 vs Gen 4 they are exclusive to their own version. The trigger housing found in the Glock 19 Gen 4 was designed just a bit smaller than in the Glock 19 Generation 3. The smaller trigger housing fits in the smaller Glock 19 4th Generation frame.

So again, this is an exclusive but necessary item in the list of Glock 19 Gen 4 upgrades. The next non-interchangeable upgrade is the Glock 19 Gen 4 magazine release button. As in all of these exclusive Glock 19 Gen 4 upgrades, size matters. The new mag release button is larger than the ones found on the previous Glock 19 Gen 3. There are a few parts when it comes to Glock 19 Gen 4 upgrades that are compatible with the Glock 19 Generation 3. Most lie within the fire control mechanism.

And, honestly, many shooters would never even think about changing them. The trigger bar deactivates the firing pin safety once the trigger is pulled. The trigger bar on the Glock 19 Gen 4 features a small bump. This serves to center the trigger bar on the firing pin safety, which is one of the three parts of the Glock safe-fire action. You can change the trigger bar from the Gen 3 into the Gen 4 or the other way around.

Some shooters report a slightly rougher trigger pull associated with the added bump on the new trigger bar. Glocks have always been known for their reliability. Whether or not you like the brand it is an undeniable fact that these guns will perform in adverse conditions and are durable enough to take a beating.

It is an old saying that a firearm is only as accurate as the person behind the trigger. This is true, but it still helps when the gun in question has a great barrel to help the shooter out. I have always found Glocks to be accurate pistols with good barrels.

The form factor of the Glock 19 lends well to concealed carry purposes. It is especially a good option if you are someone with big hands as the grip on the 19 is only about an inch smaller than the full-sized The size of the Glock 19 also allows it to be a good choice for a primary service pistol.

It hits the middle ground of a compact pistol where it is very versatile and can serve multiple roles. Glock changed up their magazines with his generation giving them some steel reinforcement making them keep their shape and not warp in the mag well making it a pain to reload. Even more good news with these magazines is that the larger capacity mags for the 17 also are compatible with the Field stripping these guns literally can be done in under a minute which makes maintenance a breeze.

Since the gen 3 Glocks have been on the market for many years, you can bet that there is a ton of aftermarket parts available for them. The sky really is the limit on what you can do with these guns, and you can really tailor it to your personal needs. If you have smaller hands you might want to swap the frame with an aftermarket option without said grooves. Taking this a step further I would argue that the ergonomics in general on the gen 3 Glock 19 really are nothing to write home about.

Sure the thumb groove is nice but overall the gun still feels like a 1x4 in your hand. I am not a fan of having polymer sights on a pistol. They are more prone to breaking than steel sights and the Glock stock option from the factory has polymer sights with a horseshoe design. The Glock 19 is the middle child of the 9mm lineup. Being a compact size it is smaller than the full-sized Glock 17 and larger than the sub-compact Glock Glock also offers crossover models in the Glock 19x and the Glock Basically, both of these guns are compact pistols that have the smaller slide of the G19 with the larger frame of the G When the Glock 19 came out it became very popular with detectives and undercover cops.

The smaller profile of the 19 made it ideal for concealed carry operations. They are very slim handguns making them great for concealed carry and they also have stainless steel slides. The frame of the SR9 is slightly larger than the Glock 19 allowing it to have a 17 round magazine capacity. Another compact striker-fired handgun releasing at a similar time to the gen 3 Glock 19 is the Springfield xD. The Gen 4 also introduces a new and redesigned ambidextrous magazine release system, that is now extremely reliable; of course, backwards compatibility is also lost, and although Gen 4 magazines can be used in previous generation pistols, the opposite is impossible.

Most of the smaller parts remain unchanged: only for the Compact models G19, 23 and 32 , both the locking block and the spring loading the disassembly lever have been updated. Notice that the slide and barrel finish are different, the Tenifer surface treatment has been replaced by a similar process that is faster and safer to apply and is reportedly much friendlier to the environment. The color of the metal surfaces of the Gen 4 are also different, being a lighter and somewhat duller grey.

A close examination of the latest Gen 3 pistols shipped and all of the Gen 4 production reveals that a very through optimization of the design has been specifically carried out for this caliber. With the new Dual Recoil Spring assembly, Glock managed to solve, or at least mitigate, a problem that affects all its. Matter of fact, the previous models G17 e G23 were essentially the same gun, but with a different barrel and slight modifications to the breech face of the slide to accommodate the larger cartridge.

The recoil spring was the same, correctly dimensioned for 9mm energies and not for the much different. These translated into high residual energies transferred to the polymer frame, and an uncomfortable shooting experience. The new Dual Recoil Spring assembly absorbs better the harsh initial spike and generally higher energies of the. The idea to use the same spring for both calibers 9mm and. And, that is exactly what happened, casting a doubt over the reliability of the new handguns, at least until Glock made the decision to introduce a specific recoil spring dimensioned for the 9mm caliber and offering a free replacement program for all the current owners of 9mm Gen 4 pistols.

Even with this new recoil spring, the 9mm pistols could exhibit a softer and somewhat slower spent case extraction compared with the previous generation guns, and it was not uncommon to hear complaints in regards to ejection problems, such as stovepipes, cases not clearing the ejection port, and so on.

The cause appears to have been located in the new shapes and measurements of the Extractor, Ejector and the profile of the ejection window, all with subtle changes that added together have resulted in these problems. The new part carries the Part no. We mentioned that Glock manufactures and sells both Generation 3 and 4 handguns.

Why keep both lines commercially available? We can only speculate on the reasons. First of all, Glock has many tenders, contracts and commercial agreements with Government Agencies that maybe even purchased large stocks of spare parts and may not accept a different and incompatible model as replacement.

If Glock manufactured only Gen 4 pistols, it would lose all sales in those States overnight. Third, and last, regards the public, like me and you: Gen 4 pistols, undeniably did not start on the right foot, and still today there are many customers feeling uncomfortable choosing the unknown path, therefore preferring a Gen 3 pistol… not realizing that the newest Gen 3 production is very similar to the Gen 4 guns.

Glock Gen 4 improvements weren't nothing, but didn't exactly reinvent the wheel. However, there's just enough of a difference that it could definitely tilt you to one side or another if deciding between a Glock Gen 3 vs Glock Gen 4 pistol.

Right before the introduction of the Glock Generation 4 guns, a limited edition of Gen 3 pistols was made - called the RTF2 or "Rough Textured Finish" - with a few different bits. The slide serrations were changed to fish scales and the texturing was changed, with stipling rather than a rough texture on the sides and checkering on the front and back of the grip. They made the magazine release button a little bigger and made it swappable for left-handed users.

A dual recoil spring was added for better shooting as well. Glock also created modular backstraps for the Gen 4 pistols, which were cleverly named the "Glock Modular Backstraps. Along with all the standard models such as the Glock 19 Gen 4, the fourth generation of Glock pistols also introduced the Glock While completely and utterly late to the single-stack subcompact 9mm party, it still became one of their most popular pistols to date.

As you've gathered so far, the differences between Glock Gen 4 vs Glock Gen 3 are moderate. Nothing is changed internally or really all that substantially; the gun is pretty much the same except for some surface changes. That said, those surface changes may make a difference to you. The stipling on the Gen 4 Glock pistols is a little more aggressive. You'll get a bit more secure of a grip. Granted, some people don't like that as much; some pistols feel almost like the gun could double as a low-grade rasp and that's annoying.

However, some prefer the added traction, especially when shooting with gloves. Another feature that the Glock Gen 3 guns lack is the modular backstraps. It either fits you or it doesn't and there's not much to help it if that's the case short of an aftermarket frame. The Gen 4, on the other hand, has several sizes of backstrap that can be easily swapped in for a better fit.

That's a plus if the standard pistol doesn't have the best fit out of the gate. There is also the reversible magazine catch for lefties, which is a plus. The dual recoil spring You may think so, you may not.